New features with AN-2020-10-09: This is the first localization step for the schily source consolidation. Many programs now (hopefully) call gettext() for all strings that need localization. - The next step will include dgettext() calls for the libraries and the missing programs - The following step will include the extracted strings - The last step will include German translations and install support for the resulting binary message object files. ----------> Please test and report compilation problems! <--------- ***** NOTE: As mentioned since 2004, frontends to the tools should ***** ***** call all programs in the "C" locale ***** ***** by e.g. calling: LC_ALL=C cdrecord .... ***** ***** unless these frontends support localized strings ***** ***** used by the cdrtools with NLS support. ***** *** WARNING *** *** Need new smake *** *** Due to the fact that schily-tools 2014-04-03 introduced to use new macro *** expansions and a related bug fix in smake, you need a newer smake *** to compile this source. If your smake is too old and aborts, ensure to *** use the recent smake by calling: cd ./psmake ./MAKE-all cd .. psmake/smake psmake/smake install The new smake version mentioned above is smake-1.2.4 The recent smake version is smake-1.3 *** Due to the fact that schily-tools 2018-01-26 introduced *** optimizations for the Schily version of SunPro Make, you *** need at least the dmake version from 2018/01/11 with support *** for the "export" directive to compile with this makefile system. WARNING: the new version of the isoinfo program makes use of the *at() series of functions that have been introduced by Sun in August 2001 and added to POSIX.1-2008. For older platforms, libschily now includes emulations for these functions but these emulations have not yet been tested thoroughly. Please report problems! BUG WARNING: Please never report bugs only to Linux distributions as they usually do not forward these bug reports upstream and as the Linux distributions typically do not let skilled people check the bugs. We did not hear about a FIFO problem in star for a long time. Then a problem on Linux occurred once every 6000-10000 tries but it did not happen on Solaris after even 10 million tries, so it was not known besides Linux. BUG WARNING: *** GNU make *** starts too early with parallel execution (when reading Makefiles and evaluating rules for "include" statements already). Since GNU make does not support a concept for a correct ordering of such actions, you need to be prepared to see gmake fail in parallel mode. If you are interested in reliable parallel execution, it is recommended to use the included "dmake" program with a command line like: dmake -j10 -f SMakefile from the top level directory. Note that if you are on Linux, you need a halfway recent kernel or the compile time will not go down because of the low POSIX semaphore performance in older Linux kernels. The "dmake" program included in the schilytools tarball is the current version of the "new" SunOS make program that has been introduced in January 1986 by Sun Microsystems. It also introduced new features like the "include" directive that 3 years later have been copied by gmake in a partially buggy way. As gmake does not fix showstopper bugs, it cannot be supported. Current showstoppers are: 1) gmake executes "include" related rules in the inverse order, causing rules to fail if they depend on files created by an "earlier" action 2) gmake caches an outdated state of the directory and aborts with a wrong complain about allegedly missing files that in fact exist already. - autoconf: Added support for newer HP-UX versions on Itanium. Thanks to Rudi Blom for reporting and making a change proposal. - libschily: getdelim() now always allocates a new line buffer if line_size is 0 at entry of getdelim(). - udiff: replaced a call to mmap() by an assignment to "" in case that the the file size is 0. This avoids the need to call seek()/getdelim() for zero sized files, which is documented to fai. - udiff: reset a common line buffer to NULL if it's size is listed as 0 before fcalling getdelim(). On FreeBSD 12 and 13, udiff dumped core when calling "udiff file empty" and getdelim() from the new FreeBSD libc triggers the core dump, because a previous getgelim() emulation in udiff.c from a mmap()d file did set the line buffer to a value != NULL without allocating space and without setting the size because that was set to a pointer from the mmap()d area. Thanks to Nico Sonack for reporting - udiff: no longer calls mmap() if the file is not a regular file because in that case, statbuf.st_size may not be correct if the object is not a plain file. Named pipes e.g. list statbuf.st_size as 0 but read() returns data. - SCCS: libcomobj: sethome.c: If sethome was called from the project home directory and not from a subdirectory inside the project home directory, sethome() did try to access buf[strlen(buf)]. This did not yet cause any problems on Solaris or Linux and this still did not cause problems on FreeBSD older than FreeBSD-13. On FreeBSD-13, the buffer (which is on the stack) seems to have non-nul content past the end of the string and thus bulkprepare() fails. We now introduced a special condition that handles this case and that sets cwdprefixlen to 0 and cwdprefix to "" in such a case. Thanks to Nico Sonack for reporting - SCCS: a new version date has been created. - Bourne Shell: The "wait" builtin is now POSIX compliant and returns 127 in $? in case that a process id to be waited for does not exist. - Bourne Shell: The exit code retrieved by $/ no longer is masked by 0xFF when this code originates from a wait(1) call. Thanks to Koichi Nakashima for reporting - Bourne Shell: The man page has been enhanced for a better description of the exit code constraitns. Thanks to Koichi Nakashima for reporting - Bourne Shell: The exit code from background jobs is now kept until the builtin wait(1) is called. Note that this introduces the need to call "wait" from time to time in order to free shell job management resources. Thanks to Koichi Nakashima for reporting - Bourne Shell: The changes to keep exit codes for background jobs caused problems that triggered a SIGSEGV in the shell with jobs like: (sleep 10; exit 17)& This needed a restructuring in the job management implementation. - Bourne Shell: Since the next POSIX standard will make it optional whether sig2str() and str2sig() deal with entries for "EXIT" / 0, we enhanced the trap2str() and str2trap() interfaces to handle "EXIT" / 0 and now call these functions before sig2str() and str2sig(). - Bourne Shell: trap2str() is only needed with DO_POSIX_TRAP, so make it #ifdefd to avoid a warning when compiling obosh. - Bourne Shell: a new version date has been created. - SunPro Make: The man pages now include a "SOURCE DOWNLOAD" section. - SCCS: The current idea for converting a historic SCCS project into a project oriented SCCS history bundle is the following: - Create a user map file for "sccslog" by calling: mkdir $HOME/.sccs $EDITOR $HOME/.sccs/usermap Enter the UNIX login names followed by a TAB, followed by an E-mail notation. Use one line per user, e.g. joerg J. Schilling - Create a copy of the whole project to work on for this test. Do not do this conversion on the original project until sccs-6.0 is ready. - chdir to the project home directory of the just created copy. - Call "sccs init -i ." to make the project using an in-tree project oriented repository. - Call: find * -path '*SCCS/s.*' | /opt/schily/ccs/bin/sccscvt -NSCCS/s. -k -ooo -V6 - for the CSRG BSD project use: find * -path '*SCCS/s.*' | TZ=US/Pacific /opt/schily/ccs/bin/sccscvt -NSCCS/s. -k -ooo -V6 - to convert all history files into SCCSv6 history files. The TZ=US/Pacific is important for the UCB conversion since SCCSv6 uses timezones but SCCSv4 does not and we need to have the correct timezone entries in the SCCSv6 history files. For the complete "schilytools" project with 4200 SCCS history files in 55 Mbytes, this takes 12 seconds for the SCCS history from 1984 .. 2020, but note that most of the edits from the 1980s are lost, so there are few entries from the time before 1989. An alternate example: the SCCS history from the BSD-4.4 project from December 1979 up to June 1995 is in 12600 SCCS history files that take up 125 MB. The conversion time to the SCCSv6 history file format is 18 seconds. - Call: find * -path '*SCCS/s.*' | /opt/schily/ccs/bin/sccslog -changeset - to populate the changeset file from the existing deltas. For the complete "schilytools" project with 19600 commits, this takes 8 minutes. The resulting file .sccs/SCCS/s.changeset has a size of approx. 7 MBytes. An alternate example: the SCCS history from the BSD-4.4 project from December 1979 up to June 1995 has approx. 47000 commits. The conversion time is approx. 40 minutes. The size of the resulting changeset file is approx. 14 MBytes. - convert the in-tree repository into an off-tree repository. This final step is not yet needed and there is currently no code to do that automatically. - If you like to check the resulting changeset file, there is currently only one way to look at it, by calling: sccs -O get -p -A -m .sccs/SCCS/s.changeset | more This prints an annotated version of the changeset file. The next task is to develop an enhancement to "sccs log" that prints the changeset in a way similar to what "hg log -v" prints. - NOTE: Normal filesystems on Linux are slow, it is advised to make the conversions on tmpfs for performance reasons in case you are using Linux. Please however keep in mind that this is still experimental and there is absolutely no grant that a changelog created with current experimental software will work correctly with the final SCCS version. The procedure is just an example to check how it may look like. The final conversion method will be more automated... most likely by a command similar to "sccs import ..." IMPORTANT: This is not yet the time to finally convert a project into the project mode, because the project would be stuck in the current state. What we need to continue work in that repository state in the project mode is at least a working "sccs commit". Be prepared to remove the changeset history file once "sccs commit" works and to re-create the changeset file for that time. - SCCS TODO: - Activate "fsdiff" as a "bdiff" replacement in delta(1) to speed up delta(1) and to reduce the size of the SCCS history files. - Implement something that outputs similar information from the changeset file as printed with "hg log -v". This would be the next key feature. - verify whether sccs.c uses -NSCCS in the back end programs correctly, instead of converting g-file names from the command line into s.file names in the frontend in order to forward s.file names to the backend programs. This is needed for an off-tree repository. The related unit tests are already passed. - Add code to to sccs(1) to send a list of files to admin(1) and delta(1) with new or modified files in order to have all important code for a "sccs commit" in a single program that does not need to deal with ARG_MAX limitations. - Add code to admin(1), delta(1), sccs-log(1) and get(1) to maintain/understand the changeset file. This is mainly writing out the sccschangeset(4) entries to an intermediate store if a single file has been treated successfully. For sccs-log(1), see below. - Finish the work to allow normal line based diffs in SCCS even for binary files. This are files that include nul bytes and this needs to completely avoid fputs() and this needs an initialized member p_line_length in struct packet even for all content that does not result from a previous getline() call. - sccs -R tell (and probably other subcommands?) does not yet work in NewMode - Add code to libcomobj to understand the changeset file. This is needed in order to e.g. know the file names and file specific SIDs/state that corresponds to a project global SID. - Find/verify a complete transactional model that allows to repair complex changes to the set of files for a project that have been aborted in the middle. The current idea is to create the file $PROJECTHOME/.sccs/changeset with the deltas to the changeset during a complex update operation. - Find a decision on how to deal with the admin flags that are currently implemented as global flags and thus do not depend on the SID (version) if the history file. - Aborting a transaction via ^C currently requires a manual removal of the global lock file. Find a way to avoid this in case that a commit has been aborted while being prompted for a commit message (which is before any real action happened). - Implement a fully automated method to convert a SCCSv4 based history with unrelated history files into a new SCCSv6 based project mode history with a populated changeset history file. This will most likely be done as a variant of the to be defined new command "sccs sccsimport" that imports a whole existing old SCCS project. - Implement this "sccs sccsimport" based conversion in a way where sccs(1) holds the global changeset lock for the whole time of the conversion. - Bourne Shell Missing features for POSIX compliance: - Support for $'...' quoting (this is not needed for the current version of POSIX but for the next POSIX version that will be named SUSv8). The development of SUSv8 will start in late 2016. We are now expecting the Bourne Shell to be fully POSIX compliant. - Bourne Shell further TODO list: - Finish loadable builtin support. - POSIX does not allow us to implement ". -h", so we will add a "source" builtin to be able to implement "source -h" - The following builtins (that are available in bsh) are still missing in the Bourne Shell: err echo with output going to stderr glob echo with '\0' instead of ' ' between args env a builtin version of /usr/bin/env The following bsh intrinsics are still missing in the Bourne Shell: - the restricted bsh has restriction features that are missing in the Bourne shell. - source -h read file into history but do not execute and probably more features not yet identified to be bsh unique. Author: Joerg Schilling D-13353 Berlin Germany Email: joerg@schily.net, joerg.schilling@fokus.fraunhofer.de Please mail bugs and suggestions to me.